【Performance】

◆ Use conveniently with monocomponent, no solvent and pollution.
◆ Can keep smooth even without special treatment.
◆ No heating and pressing while curing. High curing speed(Curing time at room temperature＜3s＝, facilitating to assembly line).
◆ Have good electric property and widespread applications.
◆ 2.7 Can use it at -40-70℃ with good chemical, weather and heat resistance.
◆ 2.7 Just little adhesive is enough unit acreage, about 5 mg/cm2.
◆ Have transparent, smooth appearance after cured. May be used for bonding transparent object.

【Specification】

【Operation instructions】

◆ Remove stains, water and make the wanted surface smooth and coincidence. Wriggle the wanted surface to make the adhesive liquid uniform after dripping the adhesion on the wanted surface. The thickness of adhesive should keep in 0.01-0.08 mm. If the stitch is more than 0.2 mm, you should use the enconsistanted adhesive.
◆ 4.3 Gather up the wanted surface and press them slightly. It will set in several seconds and the most powerful strength is reached after 24 hours.
◆ Paint on upper surface if they are same materials; paint the smaller part if they are not same size; paint on the curing slowly part if they are not the same materials.
◆ If you want to depart the bonded components, you can use following method.
   ◇ Immerse the components in acetone, nitro methane, DMF or 10% NaOH at 70℃. They will come to unglue by themselves.
   ◇ Heat the components to 150℃ with alcohol lamp or heating mineral oil. It will be departed by a little force.
   ◇ Depart them with knocking them, for the layer of adhesive has low shock resistance.

【Notes】

◆ Not ideal for bonding porous materials.
◆ when it is used for sticking metal, the adhesive cannot bear immuring in water. It just meets the emergency.
◆ This product is inflammables. Keep away from light and heat. Store under 25℃ for 6 months.
◆ The adhesive liquid is low poisonous and harmful to your skin. When contacting the adhesive, flush it with soap water or warm water at once. Used in the place of good airiness.
◆ Not to be taken orally. Keep out of the reach of child.
◆ The adhesive must avoid water or alkali materials. Otherwise it will cause polymerization and lose efficacy.

【Performance data】